$title[0]="PRO 002 MP Tweeter";

$keywords[0] = "Speaker repair, Peerless tweeter upgrade aluminum inverted dome tweeter, Peerless tweeter replacement";

$description[0] = "A new concave aluminum dome tweeter built on a 4 1/2 by 3 1/8 inch faceplate as an upgrade for Peerless models, featuring very low distortion, wide dispersion, and extended frequency response";

$image[0] = "https://www.humanspeakers.com/diy/parts/images/fb-002mp.png";

$path[0]="Other Speaker Parts";

$text[0]="<h1>PRO 002 MP
<BR>\$$twm each</H1>

<P><TABLE Width=100%><TR>
<TD align=center valign=top width=50%>originals:<P><I>(Photos to come soon!)</I></TD>
<TD align=center valign=top width=50%>replacement:<P><A HREF=\"https://www.humanspeakers.com/o/parts/images/002mp.jpg\"><IMG SRC=\"https://www.humanspeakers.com/o/parts/images/002mp-sm.jpg\" WIDTH=\"300\" HEIGHT=\"200\" ALT=\"New drop in replacement for Peerless tweeter\"></A></TD>
</TR></TABLE>

<P>This configuration of my aluminum concave dome tweeter is designed to be a drop-in upgrade for the ubiquitous Peerless soft dome tweeters used in many, many speakers from the 1970s and 1980s.

<P>The aluminum concave dome is far smoother and sweeter, with wider dispersion, than the soft convex dome it will be replacing.  Since it has similar efficiency and impedance characteristics, it will work with most existing crossovers  designed for the Peerless units, but if there is any doubt, just ask.

<!-- transclude tweeter graphs and specs to all 002 M pages -->

<P>It measures 4 1/2 by 3 1/8 inches, and the input terminals are 0.110\" male quick disconnects.  I can also use a 0.200\" male for one (or both) if yours are made that way. The mounting holes accommodate a #8 pan head screw or bolt, and #6 will work fine too.

<P>There are many Peerless tweeter part numbers that use this basic configuration, including 810665, KO10DT, and DT115.

<P>It is seen in many Advance, ADS, B & O, Braun, Cizek, Design Acoustics, IMF, Infinity, Jennings Research, M & K, Paradigm, Polk Audio, Tandberg, and later model AR (Acoustic Research) and KLH speaker systems.

<P>The magnet structure and specifications are the same as the <A HREF=\"https://www.humanspeakers.com/diy/parts/002m2.htm\">PRO 002 M2</A>.


";

return 1;