The long-awaited HUMAN 81 DK is now available.
Best viewed in "landscape" mode.
EPI & Epicure Speakers:
The Epicure Model Four Preamplifier
(note: parts and service are not available through me)
| Dimensions: | 18 1/4" x 9 1/2" x 5 1/2" |
| Weight: | 18 lbs |
| Frequency Response | |
| - Phono Section: | 20 - 20k Hz +/- .25 dB from RIAA |
| - Line Level Section: | 10 - 100k Hz +/- .25 dB |
| Total Harmonic Distortion: | Less than 0.005% at any frequency or output voltage up to 2.5 volts rms |
| Signal to Noise Ratio | |
| - Phono Section: | Better than 85 dB ("C" weighted) Better than 100 dB ("A" weighted) Referenced to 10 mV input |
| - Line Level Section: | 105 dB referenced to 1 volt input |
| Phono Overload: | Better than 150 mV (1 kHz at 40 dB gain) |
| Phase Shift | |
| - Phono Section: | Less than 5° at 20 kHz |
| - Line Level Section: | Less than 2° at 20 kHz |
| Maximum Undistorted Output: | Better than 5 volts rms |
| Rated Output: | 2.5 volts rms |
| Input Impedance | |
| - Phono Section: | 47 kΩ |
| - Line Level Section: | 100 kΩ |
| Output Impedance: | 600 Ω, tape or main output |
| Input Capacitance | |
| - Phono Section: | 37 pF |
| - Line Level Section: | 47 pF |
| Gain | |
| - Phono Section: | Variable, 36.5 dB - 43.5 dB at 1 kHz |
| - Line Level Section: | 23.53 dB |
| Volume Control Tracking: | Better than +/- 1 dB |
| High Filter: | -3 dB at 7.5 kHz, 12 dB/octave |
| Low Filter: | -3 dB at 50 Hz, 12 dB/octave |
| Bass Control: | +/- 18 dB at 20 Hz (hinge at 1 kHz) +/- 9 dB at 20 Hz (hinge at 600 Hz) |
| Treble Control: | +/- 15 dB at 20 kHz (hinge at 2.5 kHz) +/- 8 dB at 20 kHz (hinge at 3.5 kHz) |
| MSRP: | 450.00 |
| Built: | 1975... |
* * *
Top - Contact
New Speakers -
EPI and Epicure - Genesis Physics
© Copyright - All Rights Reserved
7 Kelsey Road, Lee, New Hampshire 03861
Prices can change and specifications will improve without notice